I selected the “C” jaw and timed several crimp operations. This crimp tool is a ratcheting tool that crimps the contact in a single movement and so can be very quick. The crimp contacts that I used were Molex 0.1″ KK ones, part number 08-50-0032 This currently costs £41.99 + £1.99 P&P in the UK and whilst not exactly cheap, promises to do a whole raft of different contacts and is just about within reach of the hobbyist. The generic crimp tool that I tested was the PA-09 from Precision Hand Tools. To return to the burning crimping question: Is the Molex tool needed and what advantage it would confer over a cheaper alternative? I had managed to pick up a used 68311-8200 from eBay some time ago and thus decided to do a comparison with my trusty old generic crimper. So whilst it’s not the end of the world to solder a contact (meant to be crimped), you should crimp these where possible. For this reason you’ll seldom find anything other than crimped contacts on cars. This creates a common point of failure, especially for wires that get regular flexing or vibration. One of the problems with soldering our friendly old KK contact is that the solder inevitably wicks up the wire and this makes for a brittle junction around the top of the contact. Whilst crimping is faster, it also creates a more reliable, consistent connection. I must confess to thinking that crimping was mainly about speed for volume production and that crimping was an expensive luxury. Why bother to crimp? On the face of it, it seems barking mad – squeezing some metal around a wire and expecting it to hold fast and create a good electrical contact. This is a very common practice amongst Makers and one that I used myself on many occasions. It’s worth at this point, taking a moment to consider the other option, which of course is to solder the crimp contacts. As they hadn’t, there followed a discussion on the options which basically fell into two camps: buy the genuine Molex crimp tool ( 63811-8200) for the eye-watering price of £240, or go for a cheaper more generic crimp tool. These leads were terminated on one end by the common 0.1″ molex KK connectors and I enquired whether they had a crimp tool for these. I was recently discussing some equipment repairs and refurbishments with a new sub-contractor and the subject of replacing a number of leads came up.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |